Cascadia Board Co - Drifter LED
lightly used, included is extra controller and premium bag. Does not include paddle or leash (Paddle and leash available for an extra cost). This board is the owner's personal SUP and has been very well cared for.
The Drifter LED is the same classic board you know and love, but has been upgraded with LED lights embedded in the base, a 16cm water-tight "hold" behind the paddler to store the remote control and a 16cm diameter viewing panel with 8mm tempered glass to observe the wonders beneath your board.
The Drifter model of SUP board is our all around flat water model designed with an industry leading E-Form wood laminate construction. There is a small amount of shape in the nose to handle light chop and the three fin Thruster set up will help if you decide to drop in on some small waves. With a generous width in three lengths, this board tracks well while remaining stable for bigger riders as well.
- Product Size: 11' x 33" x 5"
- Weight: 32 lbs
- Volume: 214L
- Fins: Future 3 fin thruster with 9" centre fin
- Colours: Two-Toned Wood
- Viewing Panel: 16cm diameter, 8mm tempered glass window
- Recommended Rider Weight: up to 210 lbs
This board was shaped to perform in all conditions. With more volume and width, it’s a stable board, while the thruster fin and diamond tail help it turn on the face of a wave or drop-step around a buoy.
LED E-Form Wood
The LED series of boards from Cascadia are a limited edition run of four of our most popular E-Form Wood models - Drifter 11', Gypsy 11', K’utala 11'9" and Slayer 12'. These classic boards have been upgraded to include a ring of LED lights embedded into the base of the boards. These lights are powered by a polymer lithium-ion battery (included) that lasts at least 8 hours on a full charge! The battery is housed behind the paddler in a 16cm water-tight "hold" and can be charged by a simple plug-in. In front of the paddler is a second compartment equipped with an 8mm thick tempered glass viewing window that allows you to see the wonders beneath your board. The LED lights are controlled by a remote control that allows you to switch through 7 different colour options and fluctuate the brightness.